Weathervanes

 

 

A wide selection of aviation weathervanes.  Manufactured in Steel and powder coated for a longer life.

Every weathervane is individually made to order.  It will usually take 2-3 weeks before despatch for black weathervanes, or 4-5 weeks for a coloured weathervane. If the motif is not in stock, please add a minimum extra 2 weeks.

They are available in three sizes:

PETITE: Measuring 16" across the cardinal points, this size is suitable for sheds, greenhouses Pergolas, conservatories or small garages and outbuildings. These are finished in a durable black powder coating. Petite weathervanes have a single ended scroll.

 

MEDIUM: Measuring 21.5" across the cardinal points and suitable for use on garages, stables, bungalows and other single storey buildings. 

 

LARGE: Measuring 27.5" across the cardinal points and suitable for use on large barns and other two storey buildings.

Deluxe Finish - all sizes: The weathervane is plated with a layer of zinc to BS1706 and then passivated for extra protection. It then has a zinc rich epoxy powder coat and a final black polyester powder coat. We believe this is the best finish available anywhere today.

 

FIXINGS FOR WEATHERVANES

The choice is yours. Weathervane prices include one of the fixing options detailed below.

 

 1) GABLE END FIXING - MEDIUM AND LARGE VANES ONLY:

This is the most common type of fixing we supply - use on the gable end of a building, or a chimney.  The standard projection is 6” to the hole centre, but custom sizes can be produced.

        

2) RIDGE FIXING - MEDIUM AND LARGE VANES ONLY:  Place over the ridge board, in between 2 ridge tiles. The standard bracket is made for 1" ridge - if different size required, please indicate on order.  The length of the pole is 18" (med) or 24" (large) plus legs 6" long to go over ridge board. The legs are pre-drilled with 4 off 9/32" dia holes.

 

3) POST FIXING - MEDIUM & LARGE WEATHERVANES ONLY:  Use for fixing to a flat horizontal surface, such as the top of a post or cross bar of pergola. The base plate has 4 x 7/32" dia (med size vane) or 9/32" dia (large size vane) fixing holes. The plate is 70mm square.

 

4) CLOCKTOWER FIXING - MEDIUM & LARGE WEATHERVANES ONLY:   Use on a clocktower, or where the roof comes to a point. There is 12” above the roof-line, with the bottom 5” being re-inforced. Below the roof line is 12” of M12 screwed rod, which can be cut to size on site.

 

5) SIDEPLATE FIXING - MEDIUM & LARGE WEATHERVANES ONLY:

Use to attach to upright of pergola or any other side-fixing application where there is no overhang. Holes are 7mm dia.

 

Fixing Options for Petite size weathervanes

1) An L shaped bracket with a 2” stand-off

2) 2” long woodscrew to screw directly in to a post or finial

 

ALL WEATHERVANE PRICES INCLUDE:

A choice of fitting bracket

A quantity of grease and an applicator

VAT for UK/EU deliveries

Assembly instructions.

Ball bearing & allen key

WE DO NOT SUPPLY:

Screws or anchor bolts to fix the completed weathervane in position on the building.

A compass

Display: List / Grid
Show:
Sort By:
Auster Weathervane
Taylorcraft Auster Weathervane. For more details of the aircraft click here. ..
£195.00
B17 Weathervane
B17 WEATHERVANE ..
£195.00
B24 Liberator Weathervane
B24 LIBERATOR WEATHERVANE ..
£195.00
Balloon Weathervane
BALLOON WEATHERVANE ..
£195.00
Boeing 747 Weathervane
BOEING 747 WEATHERVANE ..
£195.00
Boeing 757 Weathervane
BOEING 757 WEATHERVANE ..
£195.00
Canberra Weathervane
CANBERRA WEATHERVANE ..
£195.00
Cessna Citation Weathervane
CESSNA CITATION WEATHERVANE ..
£195.00
Cessna Weathervane
CESSNA WEATHERVANE ..
£195.00
Concorde Weathervane
CONCORDE WEATHERVANE ..
£195.00
Dakota Weathervane
DAKOTA WEATHERVANE ..
£195.00
DC10 Weathervane
DC10 WEATHERVANE ..
£195.00
English Electric Lightning Weathervane
ENGLISH ELECTRIC LIGHTNING WEATHERVANE ..
£195.00
Glider Weathervane
GLIDER WEATHERVANE ..
£195.00
Harrier Weathervane
HARRIER WEATHERVANE ..
£195.00
Powered By OpenCart
Flying Gift Shop © 2017